|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EMD9 / UMD9N / IMD9A Transistors Digital Transistor (Dual Digital Transistors for Inverter Drive) EMD9 / UMD9N / IMD9A Features 1) DTA114Y and DTC114Y transistors are built-in a EMT or UMT or SMT package. External dimensions (Unit : mm) EMD9 0.22 (4) (5) (6) (3) (2) 0.13 EMD9 / UMD9N (3) (2) R1 IMD9A (4) (5) R1 (1) R2 DTr1 (6) R2 DTr1 Each lead has same dimensions ROHM : EMT6 DTr2 R2 R1 DTr2 Abbreviated symbol : D9 0.65 1.3 0.65 R2 R1 (4) (5) (6) R1=10k R2=47k (3) (2) (1) R1=10k R2=47k (4) (3) UMD9N 0.2 0.5 Equivalent circuit 1.2 1.6 (1) 0.5 0.5 1.0 1.6 0.8 1.1 0.95 0.95 1.9 2.9 0.7 (6) 1.25 0.15 Package, marking, and packaging specifications Type Package Marking Code Basic ordering unit (pieces) EMD9 EMT6 D9 T2R 8000 UMD9N UMT6 D9 TR 3000 IMD9A SMT6 D9 T108 3000 2.1 (1) 0.1Min. 0to0.1 Each lead has same dimensions ROHM : UMT6 EIAJ : SC-88 Abbreviated symbol : D9 Absolute maximum ratings (Ta=25C) Parameter Supply voltage Input voltage Output current Collector current EMD9, UMD9N Power dissipation IMD9A Junction temperature Storage temperature Symbol VCC VIN IO IC (Max.) Pd Tj Tstg Limits 50 -6 to +40 70 100 150(TOTAL) 300(TOTAL) 150 -55 to +150 Unit V V mA mA mW mW C C 1 2 IMD9A (6) 0.3 (4) (5) 1.6 2.8 0.15 0.3to0.6 0to0.1 1 2 120mW per element must not be exceeded. PNP type negative symbols have been omitted. 200mW per element must not be exceeded. PNP type negative symbols have been omitted. Each lead has same dimensions ROHM : SMT6 EIAJ : SC-74 Abbreviated symbol : D9 Electrical characteristics (Ta=25C) Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Resistance ratio PNP type negative symbols have been omitted. Characteristics of built-in transistor. Symbol VI(off) VI(on) VO(on) II IO(off) GI fT R1 R2/R1 Min. - 1.4 - - - 68 - 7 3.7 Typ. - - 0.1 - - - 250 10 4.7 Max. 0.3 - 0.3 0.88 0.5 - - 13 5.7 Unit V V mA mA - MHz kW - Conditions VCC=5V , IO=100mA VO=0.3V , II=1mA IO=5mA , II=0.25mA VI=5V VCC=50V , VI=0V IO=5mA , VO=5V VCE=10V , IE= -5mA , f=100MHz - - (3) (2) (1) Rev.A 0.9 2.0 (5) (2) 1/3 EMD9 / UMD9N / IMD9A Transistors Electrical characteristics curves DTr1 (DTC114Y) -100 -50 VO=-0.3V OUTPUT CURRENT : Io (A) -10m -5m -2m -1m -500 -200 -100 -50 -20 -10 -5 -2 -1 0 Ta=100C 25C -40C VCC=-5V 1k 500 DC CURRENT GAIN : GI VO=-5V Ta=100C 25C -40C INPUT VOLTAGE : VI(on) (V) -20 -10 -5 -2 -1 -500m Ta=-40C 25C 100C 200 100 50 20 10 5 2 -200m -100m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 1 -100 -200 -500 -1m -2m -5m -10m -20m -50m-100m OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. output current (ON characteristics) Fig.2 Output current vs. input voltage (OFF characteristics) Fig.3 DC current gain vs. output current -1 -500m OUTPUT VOLTAGE : VO(on) (V) lO/lI=20 Ta=100C 25C -40C -200m -100m -50m -20m -10m -5m -2m -1m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current Rev.A 2/3 EMD9 / UMD9N / IMD9A Transistors Electrical characteristics curves DTr2 (DTA114Y) -100 -50 VO=-0.3V OUTPUT CURRENT : Io (A) -10m -5m -2m -1m -500 -200 -100 -50 -20 -10 -5 -2 -1 0 Ta=100C 25C -40C VCC=-5V 1k 500 DC CURRENT GAIN : GI VO=-5V Ta=100C 25C -40C INPUT VOLTAGE : VI(on) (V) -20 -10 -5 -2 -1 -500m Ta=-40C 25C 100C 200 100 50 20 10 5 2 -200m -100m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 1 -100 -200 -500 -1m -2m -5m -10m -20m -50m-100m OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. output current (ON characteristics) Fig.2 Output current vs. input voltage (OFF characteristics) Fig.3 DC current gain vs. output current -1 -500m OUTPUT VOLTAGE : VO(on) (V) lO/lI=20 Ta=100C 25C -40C -200m -100m -50m -20m -10m -5m -2m -1m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of UMD9N |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |